The installation of a primer bulb is essential to ensure the proper functioning of your vessel’s engine. It is also necessary to install the part correctly to ensure that it works properly. Moreover, you must ensure the orientation of the accessory during its installation. The following points can be taken into account to ensure the installation of your bulb.
The point on the installation of a priming bulb
Generally speaking, the installation of a priming bulb is fitted in a row. It is normally located on the rubber hose at the engine’s fuel supply. In addition, the fuel hoses must be fitted. The fuel hoses are attached to the bulb end caps in a force fit.
Note that this part is located quite close to the engine and the carburettor to ensure the passage of fuel. In addition, the product must be held in place with clamps. The slightest leak can cause operating problems. The fuel may not be able to pass through to the engine.
Other points to check when fitting a bulb
It is perfectly possible to place the bulb 30 to 45 cm from the engine. This will ensure that it works properly. The bulb can also be placed at the end of the hose. This is normally located at the tank outlet. This installation option is recommended for a boat with a feeder or removable tank.
In any case, care must be taken to fit the bulb downstream of the fuel filters. Alternatively, it can be fitted next to the decanters. It should be noted that the majority of today’s fishing boat engines have connection nipples.
The orientation of the part should not be neglected either
You must be careful with the orientation of your priming bulb to ensure its proper functioning. It is best to orient it vertically while making sure the arrow faces upwards. This will make it easier to prime the engine with fuel. The valves will also operate more easily due to the gravity of the fuel.
You may have a problem with the engine and the bulb if the bulb is incorrectly oriented. Indeed, you must be careful that the arrow does not point downwards. You will avoid problems with gravity and the weight of the fuel to be fed into the engine.
Final tips to consider before installing your bulb
It is essential to turn off the engine before installing a bulb. You should also wear safety glasses to avoid an accident. You will also need a funnel in a container to ensure that the engine is drained while the equipment is being installed. This makes it easier to fit your bulb.
Take the time to check the motor to make it easier to fit the bulb. Make sure that the part does not move too far away from the motor. In addition, you must ensure that the part ensures the passage of fuel from the tank to the engine.
